|
REPLACEMENT SEATS FOR YOUR KENNEDY ROCKER |
|
|
|

click image for larger view
Shown in Village Oak |
We have replacement cane seats available for your
Kennedy Rocker (Model 1000) or Carolina Slat Rocker
with Cane Seat (Model 950, which is now discontinued). These replacement seats are from the
original manufacturer, P & P Chair Company, so they're
guaranteed to fit *(see note below). It's a simple job to restore your rocker seat
to new condition, all you need is a Phillips screwdriver
to remove and replace the six screws that fasten the
seat to the rocker. Please read our instructions below for very
old rockers. |
|
|
There are now only
three finish options for the replacement cane parts,
unfinished, Natural Oak, or Village Oak. If your rocker is more than 6 or 7
years old you may want to order an unfinished seat and
stain it to match the finish of the back which may have
changed color slightly with age. |

click image for larger view
|
|
|

click image for larger view
|
The price of $55
includes residential shipping to anywhere in the
Continental US. Allow
7-14 business days for delivery. |
| Seat dimensions
are: 22 5/8" at the widest part X 17 1/8" deep. |

click image for larger view
Shown in Natural Oak |
|
|

Genuine P & P Chair Company products like the
Kennedy Presidential Rockers and Carolina Porch
Rockers feature a Carolina Rocker marking under the
arm of the rocker. If you see this mark you have the
real thing! |
|
|
|
|
CLICK HERE TO ORDER
|
|
*If your rocker was
manufactured before the mid-to-late 1970's your
rocker seat may have been attached to the rocker
with nails from the top. If you do not see any
screws then you may have an older type of seat. In
this case turn the rocker upside down and rest the
arms on something sturdy. Hammer gently around the
edges of the seat rails, the seat should come off
without too much trouble.
Since you won't have
predrilled holes for the screws that hold the
replacement seat on you have a couple options:
-
Drill holes in the
seat rails, you probably wouldn't need the six
screws that the factory uses, one in the front and
one in the back should be sufficient.
-
The seat fits on
fairly securely and even if you didn't attach it
at all it probably wouldn't come off unless you
turned the rocker upside down.
|
|
*These seats are for
the Model 950 and 1000 rockers only. If you have an
older rocker with a cane seat manufactured by P & P
Chair Company before 1960 it's possible you have
another style of rocker like the smaller Model 800
which was discontinued many years ago. Our seats
will not fit these smaller rockers so be sure to
measure your seat and compare it to the dimensions
given above. |
|
|
|
|

Secure transactions for this website use a thawte certificate
to ensure secure transmission of your information.

|